About Ion Beam Milling
Home
Ultra Fine Line Etching
Sitemap
Custom Thin Film Circuits
Laser Diode Submounts
Lange Couplers
Filters: Low / High / Band
Pass
Band Reject / Notch RF / Microwave
Tantalum Nitride Chip Resistors
Services
Ion Etching
Photolithography
Dicing
Wafer Processing
Standard Products
Attenuators
Planar Chip Inductors
Heat Spreaders
Microstrip Transmission Lines
News & Publication
New Products, Developments
Contact
Request for Quote
Sales Phone Numbers / eMails
Guidelines,Data & Spec Sheets
Attenuator Design Kits
Design Guidelines
Fixed Attenuator
Pads
General Mask Guidline
Guidelines Substrate
Heat Spreader
Lange Schematic
Laser Diode
Laser
Diode Heat Spreaders
Material and Metal
Overview
Transmission
Lines Data Sheet
Planar
Planar Chip Inductors
Print to Product
Resistors
Sub-Mount Data Sheet
Transmission
Lines Data Sheet
Visit Us at IMS 2008
June 15 - 20, 2008
Visit Booth # 932
1000 East Industrial Park Drive
Manchester, NH 03109
info@ionbeammilling.com
|
Planar Chip Inductors on polished quartz or alumina, that exhibit very high dimensional uniformity and repeatable performance, for bias injection and tuning in the microwave amplifier, switch and multiplier applications. We also build to custom specification.
- Gold thickness up to 6 microns (240 microinches)
for hiQ, 1.8 GHz performance.
- Line and spaces down to 8 microns (320 microinches). Vertical wall features assure chip to chip and lot to lot repeatability.
- Ti/Pt/ Au, both sides, allows for high temperature attachment and applications.
- Polished quartz (.015 thick typ.) with very low loss tangent and dielectric constant for 18 GHz applications.
- Standard sizes of .025" x .025" x .015" are available from stock. Sizes down to .012" x .012" are
available in 3/4 weeks.
| Part Number |
Number of Turns |
Nominal (nH) |
Inductance Minimum (nH) |
Maximum (nH) |
Maximum DC Resistance (OHMS) |
| 10450 | 4.5 | 7.5 | 6.0 | 9.0 | 15 | | 10350 | 3.5 | 4.5 | 4.0 | 6.0 | 8 | | 10250 | 2.5 | 2.5 | 2.0 | 3.5 | 5 |
| Part Number | Minimum Q | Test Frequency (GHz) | Minimum Self-Resonant Frequency (GHz) | Maximum Current (mA) |
| 10450 | 5 | 0.1 | 20 | 100 | | 10350 | 10 | 0.1 | 20 | 100 | | 10250 | 10 | 0.1 | 20 | 100 |
*For custom chips the Part Number designation is 1023 + # of turns-spiral configuration.
|
|
|
Copyright © 2005 Ion Beam Milling, Inc.
1000 East Industrial Park Drive
Manchester, NH 03109
Ion Beam Milling - Custom
Thin Film Circuits - Laser
Diode Submounts - Tantalum
Nitride Chip Resistors - The
Lange Coupler
Filters Standard Products - Planar
Chip Inductors - Attenuators - Services - News - Publications - RFQ - Contact
Us - Sitemap
Ion Beam Milling, Ion Etching,
Custom Thin Film Circuits, Laser Diode Submounts, Filters, Lange
Couplers, Resistors, Attenuators
Spiral Inductors, Planar Chips, Micro-Machining, Micromachining, Microfabrication,
Photolithography, RF Microwave Circuits, CVD Diamond |
